changes

okay, so i haven't been regularly posting what i've been doing, my bad

but i've actually done a lot, considering... yeah...

there has been a change of method due to the restriction equipment as some of the equipment could not be found =="

so here's the method with changes made:

1. Cut the plywood into a square 30cm by 30cm and a piece 45cm by 45cm.
2. Drill 4 evenly spaced holes into half of the bigger piece of plywood
3. Attach the 4 7.5cm long compression springs to the smaller piece of plywood
4. Use screws or wood staples to do so.
5. Place the bigger piece of plywood on top of the springs
6. Pull wire through each spring and each hole in the plywood
7. Tie the wire around a bamboo skewer and twist the wire together and cover with duct tape for a firm hold